Soler & Palau Heat Recovery unit ceiling-mounted Pureclass 800, PH -DC

Description

The Soler & Palau PURECLASS Heat recovery unit is a decentralised Heat recovery unit with a high-efficiency aluminium backflow heat exchanger (92% efficiency) and an energy-efficient EC motor. The unit provides a continuous and balanced ventilation system, sucking polluted air from indoor spaces and replacing it with fresh air from outside which has been pre-filtered. Used for ventilation in schools, commercial premises, offices, hotels and public buildings, among others. Fitted with Advanced controller, bypass control for free cooling and exchanger frost protection, alarm indicator, Modbus communication, CO2 sensor and power control pre-heater and/or post-heater depending on the model selected. Access to filters and fans through the existing hinged doors at the bottom of the unit. Comes standard with 4 brackets for ceiling mounting, an ISO coarse 60% (G4) and ISO EPM1 50% filter (F7) for the supply air side and 1x ISO ePM10 50% filter (M5) for the return air side. Optionally, the G4 filter can be replaced by an M5 or F9 filter (not included). Depending on the model selected, the unit also comes with an integrated CO2 sensor and/or the following options: DC: with water post-heater, DI: with electric post-heater, PH: with electric pre-heater, PH DC: with electric pre-heater and water post-heater, PH DI: with electric pre-heater and electric post-heater. Connection voltage: 230V-50Hz.

General information